Navigating; Adding A Detour - Jensen ADVENT NAV102 Manual De Instrucciones De Instalación Y Operación

NAVIGATING

The powerful navigation capabilities of your NAV102 will guide you along the shortest or
quickest route from A to B – with voice commands and in 3D (optional).
To begin navigation, select a location using the Go To... feature (see "Selecting a Destination"
on page 7).
Route Calculation and Guidance
After choosing a destination, the system will determine a route based on your preferences in
the "Setup" menu. (See "Setup Menu" on page 24.)
The status bar at the top of the screen indicates the route calculation progress.
Once route calculation is complete, you will be instructed to "Please proceed to the highlighted
route" (if you are not already on the route). Once on the highlighted route, guidance information
is delivered on-screen and via voice prompts. The guidance information is continuously
undated to indicate your progress.
Intersection Zoom
As you approach an intersection, the map will automatically zoom in to show a close-up view of
the roads near the intersection point on the right side of the screen.
Route Interruptions
If you intentionally or accidentally leave the current route, the NavMate software will
automatically recalculate the route and prompt you to get back on track to your destination.
You can disable this feature by checking the "Auto Recalculation Off" option in the Setup menu,
under Setup Routing Criteria.
If you leave the route to make a stop, the NavMate software remembers your destination and
asks you if you want to continue your route.
Turn by Turn
While navigating, press the next maneuver arrow on the top left corner of the map screen
screen to view a turn-by-turn list of upcoming maneuvers.
Press the button to return to the map screen.
Browsing the Map During Navigation
You can browse the map while navigating without interrupting the current route – you will still
be guided through voice commands.
• To browse during navigation, touch (and hold) the screen to activate the Map Browsing
feature. During browsing, the map screen borders will turn orange until the Back button is
pressed to return to the guide.
• Press the button to return to on-screen navigation.

Adding a Detour

If you are unable to complete the route as calculated, you can add a Detour to the route that
will allow you to stay on track to your destination.
16
NAV102 with NavMate