LeapFrog LITTLE LEAPS Manual De Instrucciones página 7

Press the green "E" button on the LITTLE
LEAPS
™ keypad again. The activity controller
will now send this code to your DVD player.
While it searches, the green light at the
top of the activity controller will fl ash.
It may take up to 30 seconds for the
LITTLE LEAPS
test this code with your DVD player.
If the green light stops fl ashing, or there is no
response from the DVD player for 1 minute,
repeat Steps 2 through 5 again with the next code
listed for the manufacturer of your DVD player.
If you have tried all of the codes listed next
to your DVD player manufacturer and have
not been prompted to push the red button,
please refer to the Troubleshooting
section of this guide for more help.
When prompted, push the red button.
If the LITTLE LEAPS
found the correct code for your player,
you should see a SUCCESS screen.
Saving Your Language Setting
Now, help the LITTLE LEAPS
save your preferred language. Press the blue
button to scroll, and the red
™ activity controller to
activity controller
™
activity controller
™
You're
ready to
play!
button to select.
7