Channel Setting - Ameriphone ALERTMASTER AM-RX2 Guía De Usuario

Channel Setting

The Alertmaster System
uses radio signals to
communicate between
the console unit and all
its accessories. For the
accessories (Door
Announcer, Baby Sound
Monitor, and Audio
Alarm Transmitter) to
"talk" to the base unit,
they all have to be on the
same "channel". A DIP
Switch is used for
channel selection.
Your system and all the
accessories have been
preset in the factory to a
standard channel. Under
normal operating
conditions, there is no
12
adjustment necessary.
If your system encounters
interference and
repeatedly activates by
itself for no obvious
reasons, it may be
triggered by a system
nearby in your
neighborhood.
If necessary, check the
DIP Switch settings on all
components of your
Alertmaster Notification
System to ensure they are
identical. If interference
from another Alertmaster
Notification System or
other wireless source is
present, change switch