Axis Orbit 4000 Manual De Instrucciones página 8

inner cutters is about one year; In order to maintain maximum shaving
performance and comfort, replace the heads an cutters once a year.
To order replacement parts, please refer to the "Ordering Replacement
Parts" section of this manual.
To Shave Longer Hairs, Sideburns
or Beards
The trimmer easily cuts the longer, hard to reach
hairs of the face and neck.
1. Turn the shaver on.
2. Push up the trimmer switch button into its locked
position.
3. To trim sideburns, hold so that the trimmer
lightly touches the skin at a 90° angle and move
downwards. To avoid draining the battery, keep the
Axis Orbit 4000 and Orbit 2000 |14| english
trimmer in its off position when not in use.
4. To trim mustache, hold the shaver at the position of your mustache
you wish to trim for a quick and easy cut. Trimmer can also be used
1
on the upper line of your mustache.
Cleaning Your Shaver
1.Regular cleaning of the floating heads and inner cutter assembly is
necessary in order to maintain the optimal performance and maximum
2
comfort from your shaver. Always turn shaver off, unplug and remove
cord before cleaning.
1. Brush off loose hairs from top of the floating heads using the brush
supplied with shaver. (fig. 1)
3
2. Remove floating head assembly
from shaver unit by pulling upwards.
(fig. 2)
Axis Orbit 4000 and Orbit 2000 |1| english
1 2