Sight mark 15-45x60SE Manual Del Usuario página 7

PRODCUT DESCRIPTION AND USES
The Sightmark Spotting Scope was designed to accommodate all users, from novice to expert, and for a variety of shoot-
ing, hunting and outdoor applications. The variable magnification allows the user greater versatility in viewing capabilities.
With a quick focus adjustment, it is easy to reach short or long observation ranges. Large objective lenses and multi-coated
optics increase light gathering capacity and allow the scope to be effective in both daylight and twilight conditions. The
Sightmark 15-45x60SE spotting scope is nitrogen purged, waterproof and features durable, heavy-duty construction that
can withstand an array of environments and weather conditions. The Sightmark Spotting Scope is ideal for a wide variety of
professional and recreational uses, including:
• Target / range shooting
• Hunting
• Nature / wildlife observation
• Sporting events
• Tourism
MOUNTING INSTRUCTIONS: TRIPOD
The included adjustable tripod is made specifically for Sightmark spotting scope and fits directly onto the tripod base incor-
porated into the scope's design. To mount the spotting scope to its tripod:
1) Locate the spotting scope's mounting base (8) by finding the rectangular extension on the bottom of the scope. Carefully
turn the scope over so that its underside is facing upward. In the center of the mounting base is a threaded like inlet (9) in
which the tripod's mounting screw will be inserted.
2) Next, examine the tripod. To find its mounting base (10), locate the rectangular piece at the top of the tripod that is the
exact size and shape of the scope's mounting base; a hole is located at the center. Through this hole, insert the tripod mount-
ing screw (11) so that the threaded end is pointing upward.
3) After the mounting screw is securely inserted into the tripod's mounting base, insert the threaded end of the mounting
screw into the corresponding inlet in the scope's mounting base and turn the mounting screw clockwise until tightened.
4) To disassemble, turn the tripod' s mounting screw counter-clockwise til the threaded end comes loose of the mounting base.
4