Silly Gifts SY101653 Manual De Instrucciones página 3

5. Basic operation
- Press "MODE" button to switch between Time and Alarm modes.
6. Time and date setting
- Press ▲ button in Time mode to set 12/24 HR time format.
- Press "SET" button in Time mode to start the time, year and date setting. Press ▲ or ▼ buttons to select the parameters appearing in
the following sequence: Hour→ Minute→Year→Month→Date.
- To confirm the selection press "SET" button and then proceed.
- To return to Time mode, press "MODE" button or press no button at all for 1 minute.
7. Alarm and snooze setting
- Switch the selector "BEEP / VOICE" first to decide using music or voice message as the alarm tone.
- Press "SET" button in Alarm mode to start the alarm parameters setting. Press ▲ or ▼ button to select the parameters appearing in
the following sequence: Hour → Minute → Snooze Interval → BEEP/VOICE
- To confirm the selection press "SET" button and then proceed.
- To return to Time mode, press "SET" button duplication until back to alarm mode, or press "MODE" button, or press no button at all for
1 minute.
Change Alarm Tone
- Change Snooze Interval, press "MODE" button into Alarm mode. Press "SET" button three times to snooze interval selection. Press ▲
or ▼ button to select the parameters
- Change Alarm tone, press "MODE" button in Alarm mode. Press "SET" button four times to the tone Selection. Press ▲ or ▼ button
to select the parameters
- To confirm the selection press "SET" button and then proceed.
- To return to Time mode, press "SET" button duplicate until back to alarm mode, or press "MODE" button, or press no button at all for 1
minute.
Snooze setting
- Press "MODE" button to switch to Alarm mode and start the alarm setting.
- Press ▲ or ▼ buttons in Alarm mode to activate or deactivate the alarm with or without the snooze.
The setting sequence should be:
- When the alarm and the snooze are activated, the icons
deactivated, the icons
displayed.
- The alarm can be activated with or without the snooze function. But the snooze cannot be activated without the alarm activated.
- When the alarm time arrives, the alarm will start ringing,
Then, if the snooze set to 5 minutes, for example, it will ring in every 5 minutes for 1 minute long for 3 times.
Stop the alarm with snooze
- To stop the ringing press "MODE", "LIGHT SNOOZE" or ▲ or ▼ buttons. The snooze function will remain activated. (unless it rings for
three times already) The snooze icon
- To stop the ringing and deactivate the snooze function press "SET" button. The snooze icon
8. Temperature changing
- Press ▼ button in Time mode to switch between °C and °F.
9. Battery Installation
- On the bottom of the clock, use a coin to loosen the screw then remove the Battery Cover.
- Insert two "AAA" size batteries (not included), aligning the polarity indications (+/-) on the batteries with those in the Battery
Compartment.
- Replace the Battery Cover and screw tight.
Notice:
Keep the batteries out if you do not use the product for a long time
→ → Escape.
and are not displayed. When the alarm is activated, but the snooze is deactivated, only the icon
will remain flashing.
and are displayed. When the alarm and the snooze are both
and icons will start flashing. The alarm will ring for 1 minute.
will stop flashing.
is