Storage - Beem Multi-back Topclass 5 in 1 Manual De Instrucciones

Ocultar thumbs Ver también para Multi-back Topclass 5 in 1:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

EN
Ingredients dispenser
The ingredients dispenser allows you
to add dry ingredients such as pumpkin
seeds or raisins to the dough towards the
end of the kneading process. The bottom
flap of the dispenser opens automati-
cally during baking programmes 1-7. Flap
opening is indicated by clearly audible
clicking and several acoustic signals.
The ingredients dispenser does not open
during baking programmes 8–11 (pasta
dough, jam, baking without kneading,
cake).
NOTE
Details on the time when the ingre-
dients dispenser opens in each indi-
vidual programme can be obtained
from the table in the appendix.
Make sure that you do not overfill the
dispenser, otherwise the ingredients
may become wedged and will not drop
into the baking mould. Pay attention to
the quantities specified in the recipes.
Small-sized ingredients such as
sesame seeds can drop through the
grate at the bottom of the dispenser. In
this case, open the cover of the bread
maker and add the seeds directly to
the baking mould when the acoustic
signal for the opening of the dispenser
is emitted.
Proceed in the same way for ingredi-
ents that can melt or stick (chocolate,
cheese, pieces of fruit, etc.).
clean the dispenser after each use.
Soiling can also prevent the flap at the
bottom of the dispenser from opening.
BEEM - Elements of Lifestyle
All manuals and user guides at all-guides.com
removing the ingredients dispenser
(image D1)
Inserting the ingredients dispenser
(images D2 - D3)
If you do not intend to use the appliance
for a longer period of time, clean it as de-
scribed in the section Cleaning and care.
Store the appliance and all accessory
parts at a dry, clean and frost-free loca-
tion, which is protected against direct
sunlight.
Multi-back Topclass 5 in 1
NOTE
Short acoustic signals indicate when
the flap at the bottom of the dispens-
er opens. At this point, you can also
open the cover of the bread maker to
add the ingredients directly into the
baking mould.
When the baking process is complete,
lift the ingredients dispenser out of
the appliance, clean it, close the flap
in the base and reinsert the dispenser
into the appliance.
To remove the ingredients dispenser,
lift it firmly out of the appliance.
To insert the dispenser, push the base
flap until it closes and locks.
Press the ingredients dispenser into
the appliance until it audibly snaps in.

Storage

33

Publicidad

Tabla de contenido
loading

Productos relacionados para Beem Multi-back Topclass 5 in 1

Tabla de contenido