Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

WARNING:
To reduce the risk of injury, user must read and understand the op-
erator's manual for their string trimmer before using this accessory.
Always wear eye protection with side shields marked to comply
with Z87.1 along with hearing protection. Ensure compatibility and
proper fit before using this accessory. Stop the string trimmer and
remove battery pack or disconnect spark plug wire before changing
or adjusting accessories.
WARNING:
Do not use this accessory if a part is damaged or missing. If you are
not comfortable performing any of the functions described in these
instructions, take your unit to an authorized service center. Use of a
trimmer head that has been improperly assembled could cause the
trimmer head to come apart and/or detach from your trimmer and
result in serious personal injury and/or property damage.
PACKING LIST
See Figures 1 - 2.
Trimmer Head Assembly, Spacer, Silver Bolt, Black Bolt, Silver Nut, Black
Nut, Black Line Guide, White Line Guide, 0.095 in. Line (16 ft.), Locking
Pin, SPEED WINDER
, and Operator's Manual
INSTALLING TRIMMER HEAD
See Figures 1 - 6.
The Bump Feed String Head installs differently on different string trimmer
attachments. Assembly instructions will vary based on the style and type
of attachment you have. See figures 3 and 4 to determine if you have a
curved shaft or straight shaft attachment and if your attachment comes
with or without an arbor. Refer to the Installation Chart to determine the
appropriate items for your attachment. Be sure to follow the instructions
for your attachment style and type.
NOTE: If you cannot identify the style and type of attachment you have,
contact customer service for assistance.
 Stop the engine or motor, disconnect the spark plug wire for gas power
heads, remove the battery pack for cordless power heads, or disconnect
the plug from the power source for electric power heads.
 Remove the bump feed trimmer head housing by rotating the lower
housing counterclockwise so the arrow on the upper housing aligns with
the outside arrow on the bump feed housing.
NOTE: The housing is spring loaded and will self eject when unlocked.
 Separate the upper housing, spring, spool, knob, from lower housing
and set aside.
 Locate the bolt or nut, line guide, and/or spacer required to install the
trimmer head to your attachment. Refer to the Installation Chart for
details.
INSTALLATION CHART
If the trimmer head does not fit with any of the adaptors or
hardware supplied, contact Customer Service at 1-800-860-4050
for assistance.
Style
Type
Curved
With
Spacer, Upper Housing, Spring, White Line Guide,
Shaft
Arbor
Spool, Black Bolt, Knob, and Lower Housing
Curved
Without
Upper Housing, Silver Nut, Spring, Black Line
Shaft
Arbor
Guide, Spool, Knob, and Lower Housing
Straight
With
Spacer, Upper Housing, Spring, White Line Guide,
Shaft
Arbor
Spool, Silver Bolt, Knob, and Lower Housing
Straight
Without
Upper Housing, Black Nut, Spring, Black Line
Shaft
Arbor
Guide, Spool, Knob, and Lower Housing
995000954
7-25-19 (REV:01)
BUMP FEED STRING HEAD
3-IN-1 READY
AC053N1BFH
Items Needed for Installation
UPPER
HOUSING
SPEED
SPOOL
WINDER
SPACER
SILVER
BOLT
BLACK
BOLT
CURVED
SHAFT
CURVED SHAFTS
ARBOR
SPRING
KNOB
LOWER
HOUSING
LOCKING
PIN
SILVER
NUT
BLACK
WHITE
LINE GUIDE
LINE GUIDE
STRAIGHT
SHAFT
STRAIGHT SHAFTS
Fig. 1
BLACK
NUT
Fig. 2
Fig. 3
ARBOR
Fig. 4

Publicidad

loading

Resumen de contenidos para Ryobi AC053N1BFH

  • Página 1 BUMP FEED STRING HEAD 3-IN-1 READY AC053N1BFH WARNING: To reduce the risk of injury, user must read and understand the op- erator’s manual for their string trimmer before using this accessory. Always wear eye protection with side shields marked to comply with Z87.1 along with hearing protection.
  • Página 2 For units with arbors: CURVED SHAFT STRAIGHT SHAFT  Install the spacer onto the upper housing.  Slide the spacer and upper housing onto the arbor. NOTE: The arbor will perforate the label on the bottom of the lower housing. This will allow the arbor to insert through the unit. ARBOR NOTICE: ARBOR...
  • Página 3 TÊTE À TAILLE-BORDURES À ALIMENTATION PAR CHOCS 3-EN-1 AC053N1BFH RESSORT BOÎTIER AVERTISSEMENT : SUPÉRIEUR Pour réduire les risques de blessure, l’utilisateur doit lire et comprendre le manuel d’utilisation de son taille-bordures avant d’employer cet accessoire. Toujours porter une protection oculaire certifiée conforme à la norme BOBINE ANSI Z87.1 ainsi qu’un protection auditive.
  • Página 4: Installation Du Fil

    NOTE : L’axe perforera l’étiquette sur la partie inférieure du boîtier. Ceci ARBRE COURBÉE ARBRE DROIT permettra d’insérer l’axe à travers l’unité. AVIS : S’assurer que l’axe est correctement inséré dans le logement hexagonal de l’entretoise avant de procéder. Si l’axe n’est pas correctement inséré, ceci pourrait causer des dommages au boîtier et à...
  • Página 5 CABEZAL DE RECORTADORA DE HILO DE ALIMENTACIÓN POR GOLPE 3 EN 1 AC053N1BFH ADVERTENCIA: RESORTE ARMAZÓN SUPERIOR Para reducir el riesgo de lesiones, el usuario debe leer y comprender el manual del operador de la recortadora de hilo antes de usar este accesorio. Siempre póngase protección ocular con la marca de cumplimiento de la norma ANSI...
  • Página 6 NOTA: El árbol perforará la etiqueta de la parte inferior de la carcasa inferior. EJE CURVO EJE RECTO Esto permite insertar el árbol en la unidad. AVISO: Asegúrese de que el árbol esté bien colocado en el compartimento hexagonal del separador antes de continuar. Si el árbol no está bien colocado, el armazón superior y el separador se dañarán.