Metra BACKUPCAM-2 Manual De Instrucciones

BACKUPCAM-2
BACKUPCAM-2
Cadillac/Chevrolet/GMC 2012-up
Introduction
The BACKUPCAM-2 is designed to retain factory back up cameras
to be viewed through the aftermarket radio.
Note: For use in 44-way connector vehicles that have OEM
installed backup camera.
APPLICATIONS
CADILLAC
Escalade
(with NAV)
CHEVROLET
Avalanche
(with NAV)
Camaro
(with screen)
Cheyenne
(with NAV)
Equinox
(with screen)
Silverado
(with NAV)
Suburban
(with NAV)
Tahoe
(with NAV)
GMC
Sierra
(with NAV)
Yukon
(with NAV)
1-800-221-0932
REV. 7/24/13 © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
2012-up
2012-up
2013-up
2012-up
2012-up
2012-up
2012-up
2012-up
2012-up
2012-up
metraonline.com
BACKUPCAM-2
INTERFACE COMPONENTS
• 16-pin GMLAN29 backup camera harness.
INSTALLATION INSTRUCTIONS
From the 16-pin harness
• Connect the Yellow RCA to the backup camera input of the
aftermarket radio.
• Connect the Blue/Pink wire to the vehicle speed sense wire of the
aftermarket radio.
1-800-221-0932
REV. 7/24/13 © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
metraonline.com