Cleaning The Roller Brush - Philips FC6126/01 Manual De Instrucciones

English
10
Cleaning
Never clean the appliance or any of its parts in water or in the
dishwasher.
1 Disconnect the appliance from the mains before you clean it.
 Clean the appliance and its parts with a damp cloth.
Emptying the dirt tray
1 Always empty the dirt tray after use.
 Place the stick in upright position (Fig. 7).
 Press the dirt tray release button (1) and lift the dirt tray out of the
sweeper base (2) (Fig. 13).
 Hold the dirt tray over a dustbin. Then press the slide on the lower
handle downwards to open the dirt tray door and empty the dirt
tray (Fig. 14).
5 Place the dirt tray back into the sweeper base and push it down
into position (Fig. 15).
The dirt tray door closes automatically when you put the dirt tray back
into the sweeper base ('click').

Cleaning the roller brush

1 Switch off the appliance before you clean the roller brush.
 Rotate the roller brush until the cutting groove faces you. Use a
pair of scissors to cut the hairs, threads etc. that have collected
around the roller brush (Fig. 16).
 Remove fluff, hairs and other dirt from the roller brush.
Note: If you are unable to clean the roller brush properly in this way, you can
remove it for more thorough cleaning. See sections 'Removing the roller brush'
and 'Reinserting the roller brush' below.