Publicidad
Idiomas disponibles
Idiomas disponibles
Time-in/Time-out
Stopwatch may be paused at any time during timing event by pressing START/STOP button once. To
resume timing, press START/STOP button again. To end timing event completely, press START/STOP,
then press SPLIT/RESET to return display to 0:00 00.
Continuous Timing
When timing event lasts longer than 24 hours, stopwatch will roll over to zero and begin counting up
again.
Cumulative Split Timing
Press MODE button until three flashing bars appear on display under SU, FR, and SA.
1.
2.
Press SPLIT/RESET button to clear display to zero. Display should read 0:00 00.
Press START/STOP button once to begin timing event.
3.
4.
Press SPLIT/RESET once to "freeze" display and take split time reading. Note: Flashing colon (:)
indicates internal clock is still running.
Press SPLIT/RESET button again to resume timing.
5.
Note: Display instantly updates to show cumulative running time.
Any number of split time readings may be taken during a timing event.
6.
7.
To end timing event completely, press START/STOP, then press SPLIT/RESET to return display to
0:00 00.
Timing Two Events
Press MODE button until three flashing bars appear on display under SU, FR, and SA.
1.
Press SPLIT/RESET button to clear display to zero. Display should read 0:00 00.
2.
Press START/STOP button once to begin timing events.
3.
4.
Press SPLIT/RESET when first event ends.
5.
Press STOP/START when second event ends.
Display will show total time of first event.
6.
Press SPLIT/RESET one time. Display will show total time of second event.
7.
Press SPLIT/RESET to return display to zero.
8.
Set Time of Day and Date
Press MODE button until clock mode appears.
1.
Time of day will appear. Seconds and bar under TU will flash.
2.
Press START/STOP button to set seconds to zero.
3.
Press SPLIT/RESET. Minutes will flash. Press START/STOP button to advance minutes to desired
4.
time. Note: Press and hold START/STOP button to advance minutes rapidly.
5.
Press SPLIT/RESET again. Hours will flash. Press START/STOP button to advance hours to
desired time. Note: Press and hold START/STOP button to advance hours rapidly.
Note: A next to minutes indicates A.M. P next to minutes indicates P.M.
Note: To display time in 24-hour format, press START/STOP button until H appears next to minutes.
VWR Collection Manual ver 3, rel 5
03.05.2016
Publicidad
