Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS: UTV ENCLOSURE
POLARIS
RANGER MID SIZE UTVS
®
8. Locate the driver side door [E] and zip onto the enclosure. Repeat with the passenger door [F].
9. Pull down at the bottom of the doors and fenders to verify that the door and fenders align with the frame of
your UTV. Adjust your enclosure as necessary for proper fit.
10. Locate the included roll of adhesive-backed rip-and-grip tape inside your enclosure box. Cut tape as
needed. Apply the adhesive-backed rip-and-grip strips to your UTV roll cage as it corresponds with the rip-and-
grip strips sewn on the enclosure [G]. It is not necessary to use all the rip-and-grip tape provided. Press firmly
and allow 24 hours for the adhesive strips to cure.
Usage
The doors of your enclosure can be rolled sideways out of the way and secured with the attached rip-and-grip
straps [D]. The doors also can be unzipped and removed completely.
CAUTION
DAMAGE TO ZIPPERS AND ENCLOSURE MAY BE CAUSED WITH EXCESSIVE FORCE.
Cleaning
Don't clean the clear plastic of your enclosure when it is dry—you can scratch it. The best way to clean the clear
plastic is to hose it with water and rub it with your bare hands or soft cloth. Liquid soap may be used.
Clean the fabric areas of your enclosure with a soft brush and warm water. DO NOT USE SOAP as it can damage
the protective coatings on the fabric. Air dry.
Storage
To avoid mildew be sure that your enclosure is completely dry before you store it for an extended period in an
enclosed area.
18-156-010401-RT, 18-157-016001-RT
CLASSIC ACCESSORIES, LLC
22640 68th AVENUE SOUTH
KENT, WA 98032, USA © 2 0 1 6
c l a s s i c a c c e s s o r i e s . c o m
CLASSIC ACCESSORIES, INC.
KENT, WA USA 98032 © 2 0 1 3
16cOA51_19448
c l a s s i c a c c e s s o r i e s . c o m
Publicidad
