ACP JET Guía De Referencia De Encendido Rápido página 2

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Quick Start Reference Guide
Refer to Product Safety Manual for Safety Statements
Cleaning Oven Cavity
• Wear protective rubber gloves when
cleaning oven.
• Use only a plastic utensil or nylon
scouring pad to aid in removing soil or
build-up from the oven interior.
• Do not use knife, metal utensil, or
steel wool pad to remove baked
on material.
• We recommend using ACP Oven
Cleaner (Item CL10) and Oven
Shield (Item SH10).
• Avoid spraying caustic cleaners
or those containing ammonia,
phosphates, chlorine, sodium or
potassium hydroxide (lye) directly
on oven surfaces.
DO NOT power spray
Numbered Pads
1
Double Digit Entry
2
Manual Time Entry
3
Reset on Door Open
4
Keybeep ON
Keybeep
Keybeep OFF
5
Keybeep Volume
Solid Beep
6
3 Second Beep
End of Cook Signal
4 Beeps Once
4 Beeps Repeating
15 SECONDS
30 SECONDS
7
60 SECONDS
Keypad Active
120 SECONDS
8
Program Warning Only
Preheat Warning Only
Preheat Warnings
TEMP PAD
FAHRENHEIT
Temperature Scale
STAGE PAD
CLEAN FILTER
Message Frequency
POWER LEVEL PAD
MICROWAVE ONLY
Part No. 13092806
Printed in U.S.A. 9/13
Original Instructions
Complete Owner's Manual available online
To change options oven STANDBY must display:
1. Open and close door.
2. Press hidden pad.
• Pad is unmarked and located to the direct left of Preheat On/Off pad.
• Nothing will be displayed when hidden pad is pressed.
3. Press Program Save pad.
• The first user option will display. Oven is now in options mode.
4. Press number pad that controls option to be changed.
• See table below for options.
• Current option will display.
5. Press numeric pad again to change the option.
• Each time pad is pressed, option will change.
• Match code displayed with code for desired option.
6. Press Program Save pad to save changes.
• To change additional options, repeat steps 4 and 5.
• Changes take effect after Program Save pad is pressed.
• Press Stop/Reset to return to STANDBY, or open and close oven door.
Display
Options (Factory Settings in Bold)
Disabled
Allows 10 (0-9) preprogrammed pads.
Enabled
Allows 100 (00-99) preprogrammed pads.
Disabled
Manual time entry/cooking not allowed.
Enabled
Manual time entry/cooking allowed.
Disabled
Opening oven door does not reset oven back to ready mode.
Enabled
Opening oven door resets the oven back to ready mode.
Keys beep when pressed (keybeep on).
Keys do not beep when pressed (keybeep off).
OFF
Keybeep volume OFF.
LOW
Keybeep volume LOW.
MEDIUM
Keybeep volume MEDIUM.
HIGH
Keybeep volume HIGH.
Food done signal is a continuous beep until reset by user.
Food done signal is a three second beep.
Food done signal is four beeps, continuously.
Food done signal is four beeps, four times.
Keypad time entry window is 15 seconds.
Keypad time entry window is 30 seconds.
Keypad time entry window is one minute.
Keypad time entry window is two minutes.
ALWAYS
Keypad time entry window is always active.
Disabled
Both temperature warnings off.
Warning only when preheat temperature does not match preprogrammed temperature.
Warning only when actual oven cavity temperature is not to preheat temperature.
Both
Both temperature warnings on.
Temperatures are displayed in °F for 60 Hz models.
CELSIUS
Temperatures are displayed in °C for 50 Hz models.
Disabled
Oven will not display Clean Filter.
Weekly
Oven will display Clean Filter every seven (7) days.
Monthly
Oven will display Clean Filter every thirty (30) days.
Quarterly
Oven will display Clean Filter every ninety (90) days.
Disabled
Oven will not operate in microwave only mode.
Enabled
Oven will operate in microwave only mode.
F
or full product documentation visit:
www.acpsolutions.com
Can I change an option?
Options such as single or double digit programming, beep volume,
and maximum cooking time can be changed to suit individual
preferences.
 2013 ACP, Inc.
225 49th Avenue Drive
Cedar Rapids, IA 52404

Publicidad

Tabla de contenido
loading

Tabla de contenido