Attach The Rail To The Header Bracket - Craftsman 139.53989 Manual Del Propietário

//
//
//
//
//
//
//
//
//
//
//
Header Wail
Header Bracket
idler Pulley
Garage
Door
INSTALLATION STEP 3
Attach the Rail to the
Header Bracket
NOTE: (Optional) With an existing Craftsman
installation, you may re-use the old header bracket
with the two plastic spacers included in the hardware
bag. Place the spacers inside the bracket on each
side of the rail, as illustrated.
• Position the opener on the garage floor below the
header bracket. Use packing material as a
protective base. NOTE: If the door spring is in the
way you'll need help. Have someone hold the
opener securely on a temporary support to aflow
the rail to clear the spring.
• Position the front rail end within the header bracket
and join with a 5/16"x1-1/2" clevis pin as shown.
• Insert a ring fastener to secure.
0
Mounting
Hole
Header Bracket
0
Spacer /
Mounting
Hole
)PTION WiTH
EXISTING CRAFTSMAN
INSTALLATION
Opener Carton or
-- Temporary
Support
HARDWARE SHOWN ACTUAL SIZE
O
Clevis Pin 5/1B"xl-1/2" Ring fastener
15