Publicidad
Idiomas disponibles
Idiomas disponibles
Before using your new HDTV and free to air USB tuner, please
read the following recommendations.
IMPORTANT
•
Do not expose the equipment to extreme weather.
•
Clean only with a soft, dry cloth.
•
1 Tuner
•
1 CD drivers
•
1 Remote control
•
1 USB cable
CONTROLS
Tuner
1,. USB connector
2.- "F" type connector
Remote control
1.- Screen size
2.- TV mode
3.- On / Off
4.- Channel selection
5.- Vol+: Increases volume level
6.- Vol -: Diminishes volume level
7.- Mute: Click to disable the sound
8.- CH- Search for a previous channel
9.- CH+: Search for a next channel
HOW TO INSTALL THE DRIVERS (IN XP)
Make sure to install drivers before connect the device to the
computer.
1.- Place the CD installation into CD-ROM drive. Welcome screen will
display. Run ADTVtwins.
2.- Select "Device Driver".
3.- Select a language and click Next to continue.
4.- Click Next.
5.- Select Complete, then click Next to continue
6.- Click Finish.
7.- Restart the computer.
SOFTWARE INSTALLATION
After installing drivers, please install the Software Application.
1.- Place the installation CD into the CD-ROM driver. Then select
ADTVtwins and run it.
2.- Select Application Software
3.- Select the language and click Accept to continue.
4.- Select Next to continue.
5.- Click Accept, after reading the License Agreement.
6.- Type an User name, Company name and serial number.
Then click Next to continue.
7.- Select the folder where you want to install the files.
8.- Click Finish and restart the computer.
CONNECTION
After installing software application, install the device.
1.- Plug the coaxial cable from the antenna (We recommend to use a
HD antenna) into F connector.
ENGLISH-01
CONTENT
1
1 2 3
4
5
6
2.- Plug the USB cable into the USB connector in the tuner and the
laptop.
3.- The computer will
detect the tuner, next
window will display,
click "Not now", then
click Next.
Installation CD
must be placed
into the CD-ROM drive.
4.- Then click "Install automatically".
2
5.- Click Finish.
It is possible that you need to repeat steps 3 to 5, twice.
1.- Run Total Media 3.5.
2.- Next window will
display in the screen,
you will have three
options: TV, Video,
9
Setup
8
3.- Select TV.
7
4.- In this window
you can set the
TV signal, click Next.
5.- Select the Region,
click Next to continue.
6.- In the next window, you will have two options: Auvitek Dongle
Analog Capture and Auvitek Dongle Digital Tuner, please select first
option if you want to watch Standard TV, or second one if you want to
watch HD TV.
If you select Auvitek Dongle Analog Capture, next window will display:
Select an audio device.
7.- Select between Cable TV or Antenna TV, according your service.
8.- Click Start to search available TV signals.
At the end, a window will display with found channels. Click OK.
Click Next to continue.
HOW TO USE
ENGLISH-02
Publicidad
