System Settings - Steren MP3-850 Manual De Instrucciones

5.3 USB LINE-IN
In this mode you can use speakers connected to a computer. Simply connect the USB
cable both the speakers and the computer, select this mode and let the appropriate
drivers to be installed.

5.4 System Settings

With this option you can change some parameters.
• System time: sets the date and time.
• Backlight: set the time to show the hour (standby mode).
• Language: sets the device´s language.
• Tool:
- Power off set: if you want to save energy, you can set the power off time, and you can
select from 0 to 60 seconds.
- Alarm:
- Alarm off: enables or disables the alarm.
- Time: set the alarm time.
- Cycle: select a repeat mode, Every day, One time, Cycle (select days).
- Alarm signal: select alarm tone.
12
- Ring embedded: tone of MP3-850.
- Card folder: select a sound fi le from the plugged USB / SD device.