MōDRN HYN-GDDESK-WH Instrucciones De Ensamble página 4

STEP-BY-STEP ASSEMBLY:
STEP 1:
Carefully tap small wooden dowels into place. Leave 1/2" of the dowels sticking
1
out. Make sure the bolts go through the pre-drilled holes properly. Do not over tighten bolts.
Anti-tip Restraint is REQUIRED in order to complete construction of this product.
When properly installed, this hardware can provide protection against the unexpected
STEP 2:
Carefully tap small wooden dowels into place. Leave 1/2" of the dowels sticking
2
out. Make sure the bolts go through the pre-drilled holes properly. Do not over tighten bolts.
tipping of furniture.
4/7