Hoover 7121-01 Manual Del Usuario página 7

ASSEMBLY INSTRUCTIONS
6. Check damper to see that it opens freely.
Tape all connections to make them secure and air tight.
CONNECT WIRING AND ATTACH GRILLE
7. Wire fan following diagram on page 5. Route electrical cable
directly to unit. Cable should not touch sides or top of housing
after installing.
CAUTION: If your electrical wires do not match the colors listed,
you must determine what each house wire represents before
connecting. You may need to consult an electrical contractor to
determine safely.
8. Attach grille by pinch mounting springs and insert into narrow
rectangular slots inside the fan housing next to the fan motor.
Turn on electricity at breaker box after finishing installation.
www.homewerksww.com
7
6
7
8