Acoustic Specifications - KLIM FUSION Guia De Inicio Rapido

Acoustic specifications

- Driver type: Neodymium Magnet Driver (Ø 9 mm)
- Speaker Impedance: 32 Ω
- Rated Output Power: 3 mW
- Max Output Power: 5 mW
- Sensitivity: 100 ± 3
- L/R Channel imbalance: ≤3dB
- Frequency response: 20Hz ~ 20kHz
Microphone specifications
- Sensitivity: -42 ± 3dB
- Pick-up Pattern: Omnidirectional
- Output impedance: Max 2.2K Ω
- Standard Operation Voltage: 2 V
- Current Consumption: <500 uA
- Signal-to-noise ratio: ≥60 dB
- Max Input sound pressure level: 100 dB
Button Features
Power on
Power off
Play / Pause
Middle
Reject call
Phone redial
Answer call
Volume Up
Volume+
Skip to next song
Volume down
Volume- Skip to previous song
Answer an incoming
call and hang up the
current call
Answer third party calls
and keep the current
Middle
Switch between calls
Hang up the current
call and resume the
dB (@1kHz)
Operation
Hold for 3
Hold for 3
Hold for 3
Pair
Short press
End call Short press
Hold for 2
Double click
Short press
Short press
Hold for 1 second
Short press
Hold for 1 second
Short press
Double click
call
Double click
Short press
held call
Electronic specifications
- Bluetooth chipset: QCC3034
- Bluetooth version: 5.0
- Supported Bluetooth profiles: A2DP HFP HSP
AVRCP
- Wireless range: ≥ 10 m
- Power input: 5 ± 0.25 V DC
- Battery Capacity: 80 mAh
- Operation voltage: 3.0 - 4.2 V
- Charge time: ≤ 2 h
- Continuous music play time: ≥6 h
When the device is off, press and hold for 3 seconds to
seconds
When the device is on, press and hold for 3 seconds to
seconds
Device turns on to pairing mode automatically if there is
seconds
When playing music, short press to pause, short press
During a call, short press once to end the current call
When there is an incoming call, if you do not want to
answer the call, press and hold for 2 seconds to reject
seconds
In any mode, double-click to redial the last number you
When there is an incoming call, short press to answer
Short press to increase the volume. When at maximum
While music is playing, Hold for 1 second to skip to the
While music is playing, Hold for 1 second to jump to the
Multi-Person calls:
During a call, when there is an incoming call, short press
to connect to the new call and end the current call.
During a call, if you receive another call, double click to
connect to the third party and keep the current call on
While speaking to the second caller, double click to
connect to the original caller and keep the second caller
on hold.
While speaking to the second caller, press once to
connect to the original caller and end the other call.
Instructions
turn it on.
turn it off.
no connected device
again to play
the call.
dialed
the call
level, a beep is heard.
next track
Short press to decrease volume
previous track
hold