Steren CCTV-090 Manual De Instrucciones página 5

5.- Camera 1
Press the button to visualize the image of the camera 1
9
7 8 9 10 11 12
6.- Auto / Manual
Press to activate the automatic mode; this mode will switch from one
camera to other with a 3 seconds of interval between them
Use the manual mode to visualize the image of a camera when it was
activated by the PIR
7.- AC current
Allows you to connect the supplied AC power adapter
8.- Camera input jacks
Allows you to connect the supplied cameras
9.- Video / Audio output
Use this jacks to connect other monitor or a VCR
ENGLISH-05