Package Content - Nexxt Solutions NHC-O630 Guia Del Usuario

4. Light sensor
5. Motion sensor
6. Micro-USB port: provides the option to plug the device
to an electrical outlet
7. Battery compartment
8. Bracket with magnetic base: full swivel, with mounting
holes for exible installation options on a wall or ceiling.
9. Built-in microSD™ card slot: supports local storage for a
card of up to 128GB
10. Reset button: press and hold for about 5 seconds to
reset the device. If you have modi ed any settings, they
will return to factory default values

Package content

• Smart wire-free Wi-Fi camera (1)
• Bracket with magnetic base (1)
• Mounting screw (2)
• Plastic anchor (2)
• Mounting template (1)
• Warning sticker (4)
• Quick start guide (1)
Inserting the batteries and the
microSD™ card
The Wi-Fi camera comes with a built-in microSD™ card slot
located next to the battery holder inside the main
compartment.
To access and set up both, local video storage and power,
follow the steps below:
Step 1: Rotate the camera body counterclockwise to open
the main compartment.
Step 2: Carefully slide a microSD™ card (no larger than
128GB) into the slot. The camera will automatically
recognize the inserted SD card when it powers on.
Step 3: Install the user-supplied batteries, making sure to
place them with the correct polarity inside the holder.
Step 4: Replace the camera body cover by rotating it
clockwise until it locks in place.
Polarity on middle
two batteries
is the opposite
of the other
4 batteries,
note image.