Product Introduction - Aigostar 8433325502041 Manual De Instrucciones

PRODUCT INTRODUCTION

FOR THE FIRST USE
As there is manufacturing residue or oil remained in the toaster or heat element, it usually
will emit the odor for the first use. It is normal and will not occur after several times use,
for the first use it is suggested to operate according to the below steps, except without
bread. Then let the toaster cool down and begin toasting the first slice.
OPERATION
1. Put bread slice into the bread slot, it can be inserted two slices at most every time. If
only toasting one side or irregular bread, The bread must be put on the toast rack ,
only toast one piece every time. The toast rack is foldable, When toasting on the toast
rack, pull the rack outward. Then put the bread on the toast rack.
Note: Make sure the crumb tray is completely positioned in place before using.
2. Plug the power cord into the outlet.
3. Before toasting on the toast rack, let the appliance cool down. Make sure if toasting
on the toast rack, do not insert bread into the bread slot, a fire may be occurWhen not
use the toast rack, fold up the rack and deposit.
4. Set color controller to your desired color. The lowest is set white and the highest is
dark. The middle position of control knob can toast the bread to golden color.
Note: 1). Toasting color for one slice is darker than that for double bread at the same level.
2). If toasted continuously, toasting color for the latter bread is darker than that for
the anterior bread at the same level.
5. Press carriage handle down vertically until it is positioned in place, and toast will
begin at once. Once the bread has been toasted to the preset color, the carriage handle
will automatically spring up.
Note: Only the power supply is switching on, the carriage handle can rest on the bottom
of slot.
6. During the toasted process, you may observe the toasting color. If it is satisfying, you
press the CANCEL button to cancel the operation at any time.
7. If the bread has been taken out from refrigerator. Set color controller to your desired
color. Press carriage handle down vertically until it is positioned in place, then press
DEFROST button and the indicator of it will be illuminated, in this mode it will be
toasted to your desired color.
8. If you want to reheat the cold toasted bread, press the REHEAT button and the
indicator of it will be illuminated. In this mode toasting time is fixed, so long as time
is running over, the carriage handle will automatically spring up and end up the
reheating process.
4