Preparation Before Use - Objecto T1 Manual De Instrucciones

Correct Use of the Foot Warmer

Preparation Before Use

CAUTION
Always keep the filter case and the activated carbon filter in place while
running it.
Running without the filter case or activated carbon filter could result in fire or
damage to the product.
1. Attach the [filter cover + activated carbon filter] included in the main unit
on the two recesses on the back side of the unit.
• Remove the [filter cover + activated carbon filter] packaging.
• As shown in the above figure, 1. Attach the front, 2. Push in the rear catch until
you hear a click.
• Attach to the two left and right recesses in the same way.
2. Place the foot warmer on a level surface.
* Make sure nothing flammable is nearby; if there is something flammable, move it
before using the foot warmer.
Keep the foot warmer an appropriate distance from walls and
surrounding objects (Otherwise, it could result in a fire.)
Do not use it in the following kinds of locations:
* Unstable places, such as on a thick carpet or on top of a cushion (which may
cause the unit to tilt, be unsteady or tip over), on easily flammable items (which
could result in a fire), tightly sealed spaces, etc.
About Safety Features
• If the foot warmer falls over during use, it activates the tipover switch, turning the
power off.
• If the foot warmer gets too hot, it activates the thermostat and automatically
shuts it off. (Once it cools down, it turns back on.) If the temperature gets even
hotter, it activates the thermal fuse, cutting off the operation circuit. (Even after
it cools down, it will not turn back on.) Please contact your dealer or the Service
Center (see the back cover).
1802̲00a̲T1̲CHMS-011US̲All.indb 6 1802̲00a̲T1̲CHMS-011US̲All.indb 6
Catch
2 2
Filter cover + activated carbon fi lter
1 1
Body recess
6
English
2018/09/14 11:09:36 2018/09/14 11:09:36