Battery Removal; Product Disposal - UFESA AE4522 Manual De Instrucciones

4. Let the brush dry completely in the air before you reinsert it.
5. Reinsert the brush by first inserting the side apposite the catch and then enganing the brush on
the side of the catch.
6. Reinsert the locking catch. It must engage audbly.
Microfibre Roller:
1. To clean the microfiber roller, release the locking catch next to the brush.
2. Remove the catch and pull out the microfiber roller
3. Remove the hair, dust etc. Ife necessary you can wah the brush under running water.
4. Let the microfiber roller dry completely in the air before you reinsert.
5. Reinsert the microfiber roller by first inserting the side opposite locking catch and the engaging the
roller on the side of the catch.

BATTERY REMOVAL

The appliance must be disconnected from the supply
mains when removing the battery
Ensure that the product is discharged of all power. Unscrew the screws on the product housing.
Lift or pry the product halves apart, exposing the battery.
Disconnect the battery with the fast disconnection.
Pull the battery set from the unit.
Before disposing of the appliance, the battery must be
removed. The battery must be safely removed.

PRODUCT DISPOSAL

This product complies with European Directive 2012/19/EU on electrical and electronic de-
vices, known as WEEE (Waste Electrical and Electronic Equipment), provides the legal frame-
work applicable in the European Union for the disposal and reuse of waste electronic and
electrical devices. Do not dispose of this product in the bin, instead going to the electrical and
electronic waste collection centre closest to your home.
The product may contain batteries. Remove them before disposing of the product and dis-
pose in special containers approved for this purpose.
15