General Service - Husqvarna 917.38451B El Manual Del Propietario

• Keep the nozzle in contact with the rim
of the fuel tank or container opening at
all times until fueling is complete. Do
not use a nozzle lock-open device.
• If fuel is spilled on clothing, change
clothing immediately.
• Never overfi ll fuel tank. Replace gas
cap and tighten securely.
V. GENERAL SERVICE
• Never run a machine inside a closed
area.
• Never make adjustments or repairs with
the engine (motor) running. Dis con nect
the spark plug wire, and keep the wire
away from the plug to prevent ac ci den-
tal starting.
• Keep all nuts and bolts tight to be sure
the equipment is in safe working condi-
tion.
• Never tamper with safety devices.
Check their proper operation reg u lar ly.
Never do anything to interfere with the
intended function of a safety device
or reduce the protection provided by a
safety device.
ACCESSORIES
These accessories were available when this lawn mower was produced. They are not
shipped with your mower. They are also available at most Husqvarna retailers and service
centers. SOME OF THESE ACCESSORIES MAY NOT APPLY TO YOUR LAWN MOWER.
• Keep machine free of grass, leaves, or
other debris build-up. Clean oil or fuel
spillage. Allow machine to cool before
storing.
• Stop and inspect the equipment if you
strike an object. Repair, if nec es sary,
before restarting.
• Never attempt to make wheel height
adjustments while the engine is running.
• Grass catcher components are sub ject
to wear, dam age, and de te ri o ra tion,
which could expose moving parts or
allow objects to be thrown. Frequently
check com po nents and replace with
man u fac tur er's recommended parts,
when necessary.
• Mower blades are sharp and can cut.
Wrap the blade(s) or wear gloves, and
use extra caution when ser vic ing them.
• Do not change the engine governor set-
ting or overspeed the engine.
• Maintain or replace safety and instruc-
tion labels, as necessary.
4
KOHLER 4-CYCLE ENGINE
IGNITION / ELECTRICAL
KEY PART
NO. NO. QTY. DESCRIPTION
1 14 112 07-s 3 Spacer
2 14 072 12-s 2 Stud (1407226s)
3 14 100 10-s 1 Nut, Flywheel
(with Serrations)
4 14 109 04-s 1 Cup, Starter Drive
5 14 157 06-s 1 Fan, Flywheel
6 14 025 10-s 1 Flywheel Assembly,
Cast Iron
8 14 219 12-s 1 Brake Assembly
11 14 314 25-s 1 Guard, Finger
12 14 072 13-s 1 Stud (use 14 072 25-s)
13 14 132 11-s 1 Plug, Spark
14 14 584 04-s 1 Module, Ignition
(Cast Iron, Std. Ignition)
15 25 086 186-s 1 Screw M6 x 25
AIR INTAKE / FILTRATION
KEY PART
NO. NO. QTY. DESCRIPTION
10 17 041 03-s 1 Kit, Intake Gasket
11 14 100 08-s 2 Nut, Hex Flange (M6)
(use 14 100 16-s)
13 14 096 119-s 1 Cover, Air Cleaner
15 14 083 15-s 1 Element, Air Filter
16 14 096 118-s 1 Cover, Air Cleaner Base
17 14 123 19-s 1 Hose, Breather
18 14 094 27-s 1 Kit, Air Cleaner Base
MODEL NUMBER XT650-2031
ENGINE CONTROLS
KEY PART
NO. NO. QTY. DESCRIPTION
1 14 089 63-s 1 Spring, Linkage
2 14 079 20-s 1 Linkage, Governor
(Auto Choke)
3 14 089 14-s 1 Spring, Governor
(2800-3300 RPM)
4 14 126 53-s 1 Bracket Assembly,
Fixed Speed Control
5 25 086 166-s 1 Screw, Retangle Head
(M6)
6 14 100 08-s 1 Nut, Hex Flange (M6)
(use 14 100 16-s)
7 14 090 18-s 1 Kit, Governor Lever
OIL PAN / LUBRICATION
KEY PART
NO. NO. QTY. DESCRIPTION
5 14 199 23-s 1 Kit, Oil Pan
7 25 086 159-s 1 Screw, Hex Flange (M6)
(use 25 086 433-5)
8 25 086 293-s 7 Screw, Hex Flange (M6)
9 14 032 07-s 1 Seal, Oil
10 14 038 08-s 1 Dipstick Assembly
- - 14 310 02-s 1 Gear Assembly,
Governor
49