Goobay 51770 Manual De Instrucciones página 2

EN User Manual
USB-C™ to RJ45 Network Adapter
1 Safety Instructions
• Read the user manual completely and carefully before use.
It is part of the product and contains important information for correct
use.
• Keep this user manual.
It must be available for uncertainties and passing the product.
• Do not open the housing.
• Do not modify product and accessories.
• Do not short-circuit connections and circuits.
• Use product, product parts and accessories only in perfect
condition.
A defective device may not be put into operation, but must be disconnec-
ted from mains and protected against further use.
• In case of questions, defects, mechanical damage, trouble
and other problems, non-recoverable by the documentation,
contact your dealer or producer.
Risk of injury by stumbling and falling.
• Install the system and devices attached to it in a way that
persons cannot be injured, or objects not be damaged for
example by dropping or stumbling.
Not meant for children. The product is not a toy!
• Secure packaging, small parts and insulation against acciden-
tal use.
• Avoid stresses such as heat and cold, moisture and direct
sunlight, microwaves, vibrations and mechanical pressure.
2 Description and Function
2.1 USB-C™ to RJ45 Network Adapter
The USB-C™ to RJ45 Network Adapter adds one RJ45 connection to a
USB-C™ device.
• fast connection from a computer to a cabled network
• suitable for computers and smart devices with USB-C™ ports
• quick setup without installation
2.2 Scope of delivery
USB-C™ to RJ45 Network Adapter, User manual
2.3 Operating elements
1 USB-C™ plug
2.4 Specifications
Article number
Input
Output
Network transfer mode
Transmission speed
Data transmission rate
Operating temperature
Operating humidity
Storage temperature
Storage humidity
Weight (g)
Dimensions (mm)
Cable length (cm)
Tab.: Specifications
3 Intended Use
We do not permit using the device in other ways like described in chapter
„Description and Function" or in the „Safety Instructions". Use the product
only in dry interior rooms. Not attending to these regulations and safety
instructions might cause fatal accidents, injuries, and damages to
persons and property.
4 Preparing
• Compare the specifications of all used devices to ensure
compatibility.
• Check the scope of delivery for completeness and integrity.
5 Connection and installation
5.1 Connection
1. Plug an Ethernet cable into the RJ45 socket of the adapter.
2. Plug the other end of the Ethernet cable into a network device (e.g.
HUB, router, switch).
3. Insert the USB-C™ plug of the adapter into a USB-C™ socket of
your notebook/PC.
REV2020-09-17
V1.0 aw
Subject to change without notice.
2 RJ45 socket
51770 / 66255
RJ45 socket
USB-C™ plug
Full duplex
10/100/1000 Mbit/s
5 Gbit/s
0 - +70 °C
5-90 % RH
-10 - +80 °C
5-90 % RH
20
66 x 20 x 15
11
5.2 Installation and Settings for Windows
This product does not require any driver for installation. The installation
will start automatically when connecting the adapter with the computer.
The device is displayed in „Device Manager" once the installation is
completed.
5.2.1 Automatic setting of the IP address
1. After installation, click on ʺSettings / Network & Internet /
Network and Sharing Centerʺ to display the new Internet
connection.
When the network has received the IP address, you can connect to
the network.
5.2.2 Manual setting of the IP address
1. Click on the new Internet connection.
A new window opens.
2. Click on ʺPropertiesʺ.
3. Click on ʺInternet Protocol Version 4 (TCP/IPv4)ʺ.
4. Select ʺUse the following IP addressʺ and enter the IP address.
5. Select ʺUse the following DNS server addressʺ and enter the
DNS address.
5.3 Installation and Settings for MAC OS
This product has a plug-and-play connection on MAC OS.
5.3.1 Automatic setting of the IP address
When the network adapter has been connected and detected, it appears
under ʺSystem Preference / Networkʺ.
5.3.2 Manual setting of the IP address
1. Select the network adapter in the menu ʺNetworkʺ.
2. Click on ʺAdvancedʺ.
3. Click on ʺTCP/IPʺ.
4. Select ʺUsing DHCP with manual addressʺ in the ʺConfigure IPv4ʺ
box and enter the IP address.
6 Maintenance, Care, Storage and Transportation
The product is maintenance-free.
NOTICE! Material damage
• Clean only with a dry, soft cloth.
• Do not use cleaning agents and chemicals.
• Store cool and dry.
• Store the product out the reach of children and in a dry and dust-
protected ambience when not in use.
• Keep and use the original packaging for transport.
7 Disposal Notes
7.1 Product
According to the European WEEE directive, electrical and electronic
equipment must not be disposed with consumers waste. Its components
must be recycled or disposed apart from each other. Otherwise contami-
native and hazardous substances can pollute our environment.
As a consumer, you are committed by law to dispose electrical and electronic de-
vices to the producer, the dealer, or public collecting points at the end of the devices
lifetime for free. Particulars are regulated in national right. The symbol on the pro-
duct, in the user`s manual, or at the packaging alludes to these terms. With this kind
of waste separation, application, and waste disposal of used devices you achieve an
important share to environmental protection.
WEEE No: 82898622
7.2 Packaging
Packaging can be disposed of free of charge at the suitable collection
points – paper belongs in paper bins, plastics belong in yellow sacks and
glass belongs in used glass bins.
DE4535302615620
8 EU Declaration of Conformity
With the CE sign, Goobay
GmbH ensures, that the product is conformed to the basic European
standards and directives.
9 Symbols used
For indoor use only
Recycling
- 2 -
51770 / 66255
®
, a registered trademark of the Wentronic
IEC 60417- 5957
ISO 7001 - PI PF 066
by Wentronic GmbH | Pillmannstraße 12
38112 Braunschweig | Germany
Goobay
®