Important Safety Information; Electrical Requirements - Danby Designer DAR170A2WDD Guía De Utilización Y Cuidado Para El Propietario

Ocultar thumbs Ver también para DAR170A2WDD:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS
Please ensure that component parts shall be replaced with like components and that servicing shall be done by
factory authorized service personnel, so as to minimize the risk of possible ignition due to incorrect parts or
improper service.
This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of
electrical shock by providing an escape wire for the electrical current.

ELECTRICAL REQUIREMENTS

Due to possible variations in line voltage (caused by overloading of circuits), it is advisable to install a dedicated circuit
from the meter panel. This will help to eliminate current fl uctuation which might cause motor trouble.
IMPORTANT WARNING
An empty refrigerator or freezer is a very dangerous attraction to children. Remove either the gasket
or door from unused appliances, or take some other action that will guarantee it harmless.
DANGER: Risk of child entrapment. Before you throw away your old refrigerator or freezer:
• Take off doors.
• Leave the shelves in place so that children may not easily climb in.
This appliance is not intended for use by persons (including children) whose physical, sensory or mental capabilities
may be different or reduced, or who lack experience or knowledge, unless such persons receive supervision or train-
ing to operate the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Do not use extension cords or ungrounded (two prongs) adapters.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similar qualifi ed person in
order to avoid hazard.
WARNING Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
WARNING Do not use mechanical devices or other means to accelerate the defrosting process, other than those
recommended by the manufacturer.
WARNING Do not damage the refrigerant circuit.
WARNING Do not use electrical appliances inside the food storage compartments of the appliance, unless they are
of the type recommended by the manufacturer.
This unit is not designed for outside installation, including installation anywhere that is not temperature controlled
(including garages, porches, carports, etc.).
Before connecting the appliance to an electrical power supply, let it stand 6 hours. This will reduce the possibility of
malfunctions in the cooling system due to transport handling.
The refrigerator system of the appliance is fi lled with refrigerant and insulating substances which should be separate-
ly treated and processed. Call your nearest authorized service agent or specialized servicing centre. If you are unable
to locate one, contact your local authorities or your distributor. Be careful not to damage any tubes that may be on the
rear wall of the appliance.
WARNING
ELECTRICAL RATING: The serial rating plate indicates the
voltage and frequency the unit is designed for.
DON'T WAIT! DO IT NOW!
SAVE THESE INSTRUCTIONS!
2

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Dar170a2bsldd

Tabla de contenido