Steren CCTV-160 Manual De Instrucciones

Before using your new Electronic insect killer, please read
Before using your new CCTV camera with CCD technology, please
this instruction manual to prevent any damage. Put it away
read this instruction manual to prevent any damage. Put it away in a
in a safe place for future references.
safe place for future references.
• Do not expose your camera to extreme temperatures.Doing so could
damage the equipment and void the warranty.
• This device is only for indoor use
• Adjustable lens
• CCD technology that offers a better quality image when compared
with CMOS technology cameras
• NTSC and PAL formats
• 420 lines horizontal resolution
• Manufactured in black aluminum
• Automatic white balance
• Sharp images
1. RCA video connector
2. Power connector
3. Lens
4. Mounting base
5. Base screw
6. Butterfl y nut
USE INSTRUCTIONS
1. Set the base in the area you wish to have surveillance
2. Set the base screw
3. Set the base in the hole on the bottom of the camera; tighten the nut
to the right until it is fully tight.
4. Adjust and move the camera to the desired position. Once the
5. camera is in the desired position, tighten the butterfl y nut in order to
fi x the camera in this position.
6. Connect the red cable to a 12V
7. Use an RCA cable (not included) in order to connect one end to the
camera (yellow input) and the other end to the A/V input on the TV
8. Select the correct video input channel on your TV (for more
9. information consult your TV's instruction manual)
10. Remove the protective cover from the lens.
11. If the image that appears is not clear enough, twist the lens in order
to fi nd the optimum focus point.
12. The camera is now ready for use.
IMPORTANT
FEATURES
CONTROLS
5
3
4
1
2
500mA power adaptor
Input:
Automatic electronic exposure:
NTSC image size:
Operating Temperature:
Minimum Illumination:
Signal-noise ratio:
Product design and specifi cations are subject to change, without Product design and specifi cations are subject to change, without
notice. notice.
This Steren product is warranted under normal usage against defects in
workmanship and materials to the original purchaser for one year from the
date of purchase.
1.- This warranty card with all the required information, invoice or
purchase ticket, product box or package, and product, must be
presented when warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free
of charge.
3.- The repairing time will not exceed 30 natural days, from the day the
claim was received.
4.- Steren sell parts, components, consumables and accessories to
customer, as well as warranty service, at any of the addresses mentioned
later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God,
mishandling, leaky batteries, failure to follow enclosed instructions,
improper repair by unauthorized personnel, improper safe keeping,
among others.
a) The consumer can also claim the warranty service in the purchase
establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice
6 or purchase ticket.
Name of the retailer
Address
Product
Brand
Part number
Serial number
Date of delivery
In case your product fails or have questions, please contact your
nearest dealer. If you are in Mexico, please give a call to our Call
Center.
Call Center
01 800 500 9000
SPECIFICATIONS
12V
1/50 (1/60)-1/100000 sec.
720x480 pixels
14 to 176 °F
0.3 LUX
>48 dB
Product: CCTV Color camera with CCD
technology
Part number:CCTV-160
Brand: Steren
WARRANTY
CONDITIONS
RETAILER INFORMATION
500mA