System Requirements - DeLOCK 47171 Manual Del Usuario

Description
This DeLock Mobile rack can be installed into the 3.5" or 5.25" bay of your
computer. It includes a enclosure for SATA hard disks which you can either
operate in the Mobile rack with SATA or externally via USB.
Specification
• Mobile rack for installation in a 3.5" or 5.25" bay
• Internally to be connected via SATA
• Externally to be connected via USB
• 2.5" enclosure for SATA HDDs
• Data transfer rate: USB 2.0 up to 480 Mbps
SATA up to 1.5 Gbps
• For Windows 2000/XP/ Server 2003

System requirements

• PC with a free 3.5" or 5.25" bay and a free SATA Port
• PC or Notebook with two USB Ports for the intray
• Windows 2000/XP/ Server 2003
Package content*
• Mobile rack
• 2.5" enclosure
• 5.25" frame
• USB cable, USB power cable
• SATA cable, power cable
• screws
• User manual
* Make sure that product package contains all items before operation. If any
item is missing or damaged, then please contact your dealer immediately.
Hardware Installation
Note:
Follow the general instructions for installation of the enclosure. If necessary,
read the manual of your computer, or ask a specialist for help.
Installation of the 2.5" hard disk into the enclosure:
1. Open the housing by loosening the screws next to the connectors.
2. Take the plate and pull the slide-in frame out of the enclosure.
3. Put the HDD into the intray and connect the SATA connections.
- -