JOYTECH AV CONTROL CENTER Guia Del Usuario página 4

The AV Control Center has a total of 4 input channels. Each input channel comprises of 6 input
connectors (fig.1).
Depending on the outputs available from your AV devices, follow the most suitable cable connection
from the "Input Connection Table".
CONTENTS
FIG. 1
INPUT CONNECTION TABLE
Composite Video and Mono Audio:
Composite Video and Stereo Audio:
S-Video and Stereo Audio:
SCART:
SCART and Digital Optical:
IMPORTANT:
Each input connection will only correspond to the matching output connection. For example a SCART
cable attached to SCART Input 1 will output the identical SCART signal from the output SCART
connection and can not be displayed via the S-Video, composite video or audio connections.
Composite Video (yellow)
S-Video
SCART (Peritel)
Left Audio (white)
Right Audio (red)
Optical Audio
Connect the video to the yellow Phono socket
and the audio to the white Phono socket.
Connect the video to the yellow Phono socket,
the left audio to the white Phono socket and the
right audio to the red Phono socket.
Connect the S-Video to the 4-pin mini-DIN (S-VHS
socket), the left audio to the white Phono socket
and the right audio to the red Phono socket.
Connect your SCART cable to the 21 Pin SCART
(Peritel) socket which handles both video and
audio signals.
(Note: you must use a fully wired 21 Pin SCART
(Peritel) cable in order to extract the stereo
audio signal)
Connect your SCART cable to the 21 Pin SCART
(Peritel) socket and the Digital Optical to the
optical socket. Remember to remove the dust
cap and store safely to replace when optical
socket is not in use.