Installation Guidelines - Roca SMART SHOWER A5A104AC00 Manual De Instrucciones

❚

INSTALLATION GUIDELINES

1
1
3
1200
Proceed with the installation of supply pipes and
outlets to accessories from the mixer, as well as
hose and electrical connections taking as reference
the examples of installation page 25. Make sure the
power and water supply are closed.
3
Not included
Turn the feet on the mixer (preassembled) and se­
cure it to the wall or ceiling with the appropriate
screws.
OFF
2
257
2
Before installing the mixer and the outlet acces­
sories, proceed to purge the pipes, opening the in­
dividual cut­off valves of the supplies.
4
184
Install the filters and non­return valves to the mixer
feeds.
Connect the water outlets, considering that output1
(OUT1) must always be active (it is recommended to
associate it with the upper sprinkler).
Turn on the hot and cold water supply and verify that
the inlet and outlet connections are tight.
Remember to keep the supply and non­return filters
in correct condition.
27