Electrical Connection - Ansonic SAC137 Manual Del Usuario

Electrical connection

Connect the machine to a grounded outlet protected
by a fuse of suitable capacity as stated in the technical
specifications table. Our company shall not be liable for
any damages that will arise when the machine is used on a
circuit without grounding.
• Connection must comply with national regulations.
• If the current value of the fuse or breaker in the house
is less than 16 Amps, have a qualified electrician
install a 16 Amp fuse.
• Power cable plug must be within easy reach after
installation.
• The voltage and allowed fuse or breaker protection are
specified in the "Technical Specifications" section.
• The specified voltage must be equal to your mains
voltage.
• Do not make connections via extension cables or
multi-plugs.
• The main fuse and switches must have a contact
distance of minimum 3 mm.
B
Damaged power cable must only be replaced by a
qualified electrician.
B
If the product is faulty, it must not be operated unless it
is repaired! There is the risk of electric shock!
First use
• To have the product ready for operation before calling
the authorised service agent, make sure that its
location and power supply installations are appropriate.
If they are not, call a qualified electrician to have any
necessary arrangements carried out.
• Make sure that the power connections of the product
are in accordance with the instructions given in
relevant chapters of this manual.
Transportation of the machine
1. Unplug the machine from the mains.
2. Remove the water drain (if any) and chimney
connections.
3. Drain water remained in the machine completely
before transportation.
6 EN