Before Commissioning; Commissioning - Comedes Lavaero 150 ECO Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 46

Before commissioning

Remove the main filter from the appliance, remove the foil and put it back into the
appliance. Follow the steps in the chapter "Filter change". The main filter should normally
be changed every 6-9 months.
In order not to Monitor this, the device has a filter change indicator. This lights up when
the filter needs to be changed or cleaned.
Keep sufficient distance to all sides and to the top.
min. 40cm

Commissioning

1.
power
The power switch is used to start and shut down the device.
The switch can be operated by simply pressing it.
The unit always starts with medium (3) air flow.
When the device is started, the particle sensor needs about 1 minute to be ready for
operation. During this time the air quality display switches through the individual colours.
When the sensor is ready, the current particle load in the room air is displayed
qualitatively via an LED ambient light.
2.
speed
With this function the fan speed and thus the air flow rate, as well as the automatic mode
can be set.
In order to be able to adapt the air flow rate optimally to the respective conditions, the
device has 5 fan speeds.
By repeatedly pressing the switch, a fan speed between 1 (low) and 5 (high) and
automatic mode can be selected.
If you use the unit in automatic mode, the fan is controlled by the air quality sensor.
E-6
min. 40cm
min. 40cm
min. 40cm
www.comedes.com

Publicidad

Tabla de contenido
loading

Tabla de contenido