Oxygenics Marvel Instrucciones Para La Instalación Fácil

M
arvel
EASY INSTALLATION
INSTRUCTIONS
STEP 1 STEP 2
Remove your Remove any
existing shower remnants of old
head. To remove, plumber's tape
turn the existing and flush out
shower head in a shower pipe for
counterclockwise 5 to 10 seconds.
direction.
STEP 4 STEP 5
In a clockwise Attach end
direction, screw of hose to
handheld holder handheld holder
onto the taped and hand
portion of shower tighten.
arm. Hand
tighten only.
EASY TWIST SPRAY
SELECTION
Enjoying multiple
spray patterns
during your
shower has
never been
easier. With the
Marvel's easy twist
design, simply rotate
the face for a quick
spray change.
STEP 3
Wrap plumber's
tape clockwise
3 or 4 turns
around threaded
end of shower
arm.
STEP 6
Attach other end
of hose to base
of handheld and
hand tighten.
Insert your new
handheld shower
in holder.
ATTENTION:
WASHERS
PRE-INSTALLED
IN HOSE ENDS
Washers must be inserted
into both hose ends for
proper installation.
STOP!
NEED HELP?
PLEASE DO NOT RETURN THIS
PRODUCT TO THE STORE.
If you need installation assistance, replacement parts
or have questions regarding our warranty, our
Customer Service team can be contacted by:
PHONE:
1-866-440-9257
775-420-5600
or
LIVE CHAT:
www.oxygenics.com
EMAIL:
support@oxygenics.com
ONLINE:
www.oxygenics.com/claims
Business hours:
Monday - Thursday 7:00 am to 5:00 pm PST
Friday 7:00 am to 4:30pm PST*
*Closed on all nationally observed holidays
For use with automatic
compensating valves
rated at 1.35 GPM
(5.11 L/min) or less.