Pairing With Bluetooth Devices - LETUSHI A7Air Manual De Usuario

PAIRING WITH BLUETOOTH DEVICES

Your headset must be paired to a Bluetooth device before use.
It can only pair with 1 device at a time.
1.The A7 Air will automatically enter into Bluetooth pairing
mode after power on.
2.The status indicator light will flash red and blue in an
alternating pattern while the A7 Air is in pairing mode. (Note:
The headset will exit pairing mode if no action occurred within
5 minutes)
3.Entering the Bluetooth menu on the device you wish to pair.
Some devices require you to select "search for devices" or
"add new device" in order to create a Bluetooth pairing.
4.Wait until you see "A7 Air" on the screen of your device.
5.Select "A7 Air" on your device and follow any further prompts
to pair. Once connected, the headset had a "beep" tone.
The A7 Air will automatically shut down in 5 mins after
disconnecting from your device.
CONTROLS