Horizon Global 76398 Instrucciones De Instalación página 5

Install hitch – Raise hitch into position, raising the passenger's
side hitch bracket above the exhaust first, then raise the driver's
side into position.
Bolt tightening sequence - First, only hand tighten bottom bolts
(1 per side), snug until hitch mounting surface is flush against
bottom of frame, both sides. - Next, tighten (4) horizontal
attachment bolts, (2) per side, with torque wrench as specified so
hitch brackets are flush against the inside of frame rails, both
sides. - Final, torque bottom bolts to proper specification. 76 Lb.-
Ft. (103 N*M)
©2021 Horizon Global™ Corp. - Imprimé au Mexique
Install fasteners – Loosely install six (6) M12 bolts and 1/2" conical
washers into existing weldnuts in frame rails, (3) per side. See
Figure 1.
Raise exhaust - Raise exhaust back into position and reattach
rubber hangers.
Feuille 5 de 24 76398NP 1-28-21 Rev. A