Power On/Off - EDIFIER K6500 Manual De Instrucciones

Power on/off

Insert the USB plug into a computer
Power on: Insert the USB plug into a computer, the headset should be
ready to go and LED light will be lit.
Power off: Unplug the USB plug from the computer, the headset will power
off and LED light will be off.
Modes description
Exam mode: Volume buttons cannot function in this mode,
please adjust volume level via the connected computer.
Training mode: Press volume buttons to adjust the headset volume level;
press and hold volume buttons to adjust voice feedback and microphone
volume level.
Music mode: Press volume buttons to adjust the headset volume level;
press and hold volume buttons to adjust microphone volume level.
Note:
• In Training mode or Music mode, if microphone volume level is adjusted
to zero via the headset or the connected computer, or microphone on the
connected computer is muted, LED light will flash with a prompt tone.
• In Exam mode, if microphone volume level is adjusted to zero via the
connected computer, or microphone on the connected computer is
muted, LED light will flash with a prompt tone.
2
Exam