Beper 3BEPI001 Manual De Instrucciones página 6

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
When the charge indicator is green: the epilator is fully charged and it has cordless autonomy up to
40 minutes.
Operating Instructions
Turning the appliance on
Scroll the ON/OFF button upwards, making sure to also press the safety lock found in the centre of
the button. To select the lower speed, position the ON/OFF button in the middle; to select the highest
speed, scroll the button all the way up. To switch off the appliance, scroll down the ON/OFF button to
the original position.
Mounting of the heads
Choose the desired head and mount it on the shaft in the centre of the epilator body, press it gently
until the head results firm and steady. To remove the head, press the release button found on the back
of the epilator.
Epilation and shaving
It is advisable to use body moisturizers or oils only after the shaving.
After use, small irritations, such as red skin and dots, may occur. To help avoiding such rashes, it is
advisable to use the epilator before going to sleep at night, as usually these rashes tend to disappear
overnight.
To use the epilator, move the appliance over the skin, making sure to keep the head perpendicular to
the shaving area.
When the appliance is used on delicate areas of the body, it is advisable to stretch the skin with the
other hand; to use the epilator on the armpit, it is advisable to lift your arm up and keep your hand
behind your head.
Slowly move the epilator on the opposite direction of hair regrowth: a too fast movement may not
ensure an effective hair removal.
Note: if the hairs are longer than 3-4mm, it is necessary to trim them before using the appliance,
to ensure an effective and comfortable epilation.
While using the appliance with the shaving head on, make sure the head results flat on the skin, to
avoid possible irritations.
Epilating head
The epilating head is used to remove hair from legs, underarms and bikini area.
Select the higher speed for an effective epilation. Select the slowest speed to use the epilator on body
areas with poor hair regrowth and on hard-to-reach body parts, such as ankles and knees.
Shaving head
The shaving head can be used on every body area.
Note: the shaving head can be used in two directions, for easier shaving of underarms
Cleansing and maintenance
Attention: keep the adaptor and the power cord plug dry and away from water sources.
To clean the epilating head, after each use remove it by pressing the appropriate release button on the
back, and rinse it under cold water.
To clean shaving head, use the brush included in the box to remove hair on the blade.
Rinse heads and accessories under water, shake them firmly to remove excessive water and drops
and let all the parts dry completely.
Put the protections back on the heads, to avoid damages to blades and pincers, and store the applian-
ce with the heads and accessories in the provided case.
6

Publicidad

Tabla de contenido
loading

Tabla de contenido