Using Your Appliance - SUNFEEL ICQN Manual Del Usuario

USING YOUR APPLIANCE

1. To turn the device on and off, press and hold the on/off button until you
hear a "beep". When the unit is turned on, the heat zone indicators shall
be displayed.
2. The controls react to touching, so you do not need to apply any
pressure to the controls.
3. Place a suitable pot, pan, etc. on the cooking area that you want to
use.
4. Make sure that the base of the pot, pan, etc. you have placed and the
surface of the cooking area are clean and dry.
5. When you touch the heating zone selection control, the indicator next
to the key you are touching shall flash.
6. You can set the temperature by touching the sliding control of the
heating zone you desire. (Applies to products with slider control, see Fig. 1)
7. Use the bottom, not the tip of your finger while using the device. You
shall hear a "beep" at every touch.
8. Make sure that the touch controls are always clean and dry. Even a
thin layer of water may make it difficult for touch controls to work.
Figure 1
Correct
Temperature down Temperature up
21
Wrong