Onix M-35 Guia Del Usuario página 4

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

• Settings: In this section you can select the functions of the M35.
A) Network: M35 can connect to a wireless network or to Eternet.
a1) Network setup: choose the network to be used , whether wired or wireless
a2) Network info: info related to connection
a3) Default upnp server: to select the server to connect to
B) Time
b1) Time zone: it allows to select a specific time zone.
b2) daylight saving: DST ON or OFF.
b3) show clock: The display shows date and time.
C) User interface
c1) Language: select and change the language.
c2) Themes: There are 4 different backgrounds.
c3) display timeout: it turns the display off after a period of time (varying from 10 seconds to an hour).
D) Playback
d1) Repeat
• OFF: when OFF is selected, no reproduction occurs
• ALL: when ALL is selected, the repetition of the entire selected folder takes place
• ONE: If you select the ONE button, the repetition of the selected one file takes place
d2) Shuffle
• OFF: if you select the OFF button, the random reading is turned off
• SONGS: when you select SONGS, track reading operates randomly throughout all the folders
• ALBUMS: if you select the button ALBUM, the reading is done randomly within a single album
d3) Slideshow: Possibility to adjust the display time of information related to each file, from minimum of 5
E) General
e1) Reset settings: selecting this item, the factory settings will restore.
e2) Software Update: selecting this function, the M35 will be searching for new software updates if available.
e3) Info: information upon the hardware and software version.
e4) Legal: notes and recordings.
Use of M35 in DAC function for USB – PC
To use the M35 as a DAC, it is necessary to install the USB drivers for X-MOS present in the original packaging or
download them from the website www.onix-hifi.com. The USB connector type B is located on the rear panel of the unit.
Use of M35 in DAC function for USB Type A (Front / Rear Panel)
This input normally accepts Pen drive memories or hard disk drive if selfempowered. By Inserting a hard drive with no
self power supply, the product is not able to read the contents. The maximum output voltage of USB is 5V/1A.
4
To reactivate the display, press any key.
secs to 60 secs max.

Publicidad

Tabla de contenido
loading

Tabla de contenido