Manhattan 177375 Guia De Inicio Rapido página 2

MLDX Wireless Laser Desktop Mouse • User Manual
thank you for purchasing the Manhattan
177375. to view a datasheet with a full list of features and specifications, go to
www.manhattan-products.com.
Installation
1. Remove the battery compartment cover, insert the two included aaa batteries and
replace the cover.
2. press the usB micro receiver Release button so the receiver pops out of its onboard
storage compartment, then plug the receiver into a usB port on your computer. the
operating system will detect the new device and automatically install the driver(s).
NOTE: if the mouse and receiver do not automatically synchronize (no settings are
necessary), press both the Reset button and the scroll wheel for 15 seconds to reset
the connection.
Page
forward
Page
back
Operation
• Operate the mouse within 7 m (30 ft.) of the receiver, and avoid placing obstacles
between the mouse and the receiver (when it's plugged into a usB port) that can
interfere with the transmission signal.
• Press the DPI button to cycle through the 3 resolution settings: 800, 1200 and 1600 dpi.
• Operate the mouse on a white or light-colored surface for optimal performance.
• The mouse automatically enters a sleep mode after approximately 8 minutes of
inactivity to save power. press any key or scroll to wake it.
• If you transport the mouse or don't expect to use it for an extended period of time,
remove the batteries and store the receiver in its storage compartment.
2
English
MlDX Wireless laser Desktop Mouse, Model
®
Scroll
wheel
DPI
button
Battery
compartment
(cover removed)
English
Laser
Reset
Receiver
release
USB micro
receiver