Behringer PRO MIXER NOX101 Guia De Inicio Rapido página 26

26
PRO MIXER NOX101
PRO MIXER NOX101 Getting started
Step 3: Getting
(EN)
started
Make all the necessary audio and power
connections to the mixer. Leave the
power for all devices off!
Lower the MASTER and CUE GAIN knobs
all the way down.
Turn the power on for all other devices.
Flip the POWER switch on.
Start playing audio from your sources
(turntable, CD player).
Raise the MASTER knob up half way to
start. You may adjust it as you set
channel levels.
Turn the CUE GAIN knob up 1/3 of the way
to start. You may adjust it to desired level
as you begin setting channel levels.
Move the CROSSFADER to the left and
turn the channel 1 GAIN knob up
half way.
Raise the channel 1 volume fader up 3/4 of
the way.
With the METER button in the UP (MAIN)
position, adjust the channel 1 GAIN
so that the orange LEDs in the
VU METER light.
Lower the channel 1 fader all the way
and move the CROSSFADER all the way
to the right.
Turn the channel 2 GAIN knob up
half way.
Raise the channel 2 fader up 3/4 of
the way.
Adjust the channel 2 GAIN knob so that
the orange LEDs in the VU METER light.
Raise the channel 1 fader back to the
3/4 position.
Use the CROSSFADER to blend
channels 1 and 2.