Publicidad
Idiomas disponibles
Idiomas disponibles
EN
This manual contains important information that should be kept for future reference.
For domestic use only.
Self-assembly.
Warning! Keep children away from the assembly area. Leave the plastic bags out their reach. The small parts pose a
choking hazard.
Materials
Seat cover: 30% polyurethane, 30% polycotton, 40% PVC.
3
Seat padding: sponge 30 kg/m
.
Seat structure: plywood.
Backrest and armrests: plywood with oak veneer lacquered.
Structure and feet: metal powder coated.
Assembly instructions
Before beginning assembly, identify all components using the manual.
In order not to lose components, do not throw the package before completing the full assembly.
This product must be assembled by an adult.
Assemble on a clean, flat surface.
Recommendations for use
This product was designed for indoor use only.
Do not stand on the product.
Do not sit on the armrests.
Do not swing.
Beware of sharp objects.
Maintenance
Dust regularly with a dry cloth.
Clean with a soft, damp cloth. Then wipe with a clean, dry cloth.
In order not to damage the surface, it is recommended not to place hot or wet objects directly on it.
To avoid the appearance of marks, do not leave any object immobile for more than 2 months.
To avoid scratches, do not use a recurring sponge or grain detergent.
Mop up spills immediately with a clean, dry cloth. The use of special furniture products is not recommended or even
necessary.
For the backrest and armrests, maintain with movements in the direction of the wood fibers.
For the seat, vacuum or brush the upholstery once a week: the accumulation of dust accelerates wear and dulling of
colors. Mop up spills immediately with a clean, dry cloth, dabbing to absorb the liquid. Do not rub, this may damage the
fabric. Color variations between cleaned and uncleaned surfaces may appear. Tap the seat regularly so that it does not
wear out and get dirty unevenly.
Avoid direct and prolonged exposure of the product to solar radiation: the colors could fade.
Do not place the product near a heat source (radiator, fireplace, etc.) or a source of humidity. Heat and humidity can
damage the product.
Do not use abrasive products.
Keep the label with lot number, it may be useful in case of complain.
If you have any comments or suggestions regarding this product, assembly instructions or service received, please
enquire at your nearest store or contact us on our website at: www.habitat.eu or write to this address: HABITAT FRANCE
70 AVENUE VICTOR HUGO 93300 AUBERVILLIERS-FRANCE.
Ross – 08/2020
1
Publicidad
