Technical Data - Invisia DC146 Manual Del Usuario

OVERVIEW
Thank you for choosing the Invisia Shower Bench. Please read and
understand the instructions in this manual; keep manual for future
reference. It is your responsibility to see that your Invisia Shower Bench is
properly assembled, installed, and cared for. Failure to follow instructions in
this manual could result in serious injury or death. If you are not equipped
to undertake the outlined work, we would recommend that you have your
Invisia Shower Bench installed by a qualified contractor.
The Invisia Shower Bench is a high quality, commercial grade shower seat.
The Invisia Shower Bench is intended to provide shower seating support
for people with reduced mobility. The maximum user weight for this product
is 500lbs / 227kgs. Note: Product is not intended to support full body
weight (i.e. do not stand on the bench). The Invisia Shower Bench is not to
be used in any other way than described above.
LIMITED LIFETIME WARRANTY
Products are covered by a limited lifetime warranty against defects in
materials and workmanship for the original purchaser. Warranty excludes
products that have been damaged through misuse, accidental damage,
alteration, normal wear and tear, wood material and stain, or the use of
corrosive or abrasive cleaning products.
Buyer hereby indemnifies, agrees to hold harmless and defend HealthCraft
Products Inc. from and against any and all liabilities, claims, (founded and
unfounded), losses, damages, costs and expenses (including without
limitation consequential damages and reasonable professional fees)
resulting from buyers specification, application, or improper use of goods
described hereon; buyers omission or neglect. HealthCraft Products Inc.
does not assume any liability for damage resulting from services performed
by others or faulty installation, misuse or misapplication of goods sold by
HealthCraft Products Inc. HealthCraft Products Inc. shall not be liable for
prospective profits or special, indirect, or consequential damages, or for the
cost of any corrective work done without HealthCraft Products Inc. prior
approval. HealthCraft Products Inc. total liability hereunder shall in no
event exceed the purchase price of the goods specified hereon.
Specifications subject to change without notice.
HealthCraft Products Inc.
2790 Fenton Road
Ottawa, Canada
K1T 3T7
6
English
Gate 88
Kanalgatan 45B
Skellefteå, Sweden
EC REP
93123
DELIVERY CONTENTS / SHOWER BENCH
1. Wood Panel with Barrel Nuts (x2)
2. Support Leg with Friction Feet (x2)
3. 1/4-20 x .75" Screw, S/S (x12)
4. #12 Lock Washer, S/S (x12)
5. 5/32" Hex Key
INSTALLATION WARNINGS
1. Shower Bench is intended to be used as a sitting surface only (i.e.
downward vertical force only).
2. CAUTION - Do not exert sideward forces on the bench.
3. CAUTION - Do not use bench for more than 1 person at a time.
4. CAUTION - Do not use bench for purposes other than sitting (i.e. do not
stand on the bench).
5. CAUTION - Do not use bench on uneven surfaces that may cause the
seat to be unstable.
6. CAUTION - Seat and bathtub are slippery when wet.
ASSEMBLY
1. Ensure threaded holes in barrel nuts are aligned with holes in the wood.
Use slot drive screwdriver to turn barrel nut if required.
2. Align the plate of the support legs with the holes in the wood.
3. Thread screw and washer to the barrel nut. Tighten to secure (x12).
CAUTION: Do not overtighten screw - excessive force can crack wood.
4. Flip Shower Bench upright. Inspect hardware regularly, and tighten if
required.

TECHNICAL DATA

See Figure D.
PRODUCT USAGE
See Figure E.
FIGURE A.
FIGURE B.
FIGURE C.