Belifu SM9126 Manual Del Usuario página 4

www.belifu.co
Modes
There are 24 modes to choose from. The "M"
button cycles through the 6 main modes, all of
these 6 main modes contain different built-in 4
modes.
1. Lateral palm kneading
2. Flat palm kneading
3. Crosscut fist kneading
4. Vertical fist kneading
5. Acupuncture
6. Moxibustion
7. Acupuncture kneading
8. Moxibustion kneading
9. Rubbing
10. Rubbing reduction
11. Tapping
12. Fibrillation massage
13. Lifting-pinching manipulation
14. Vibrating manipulation
15. High frequency manipulation
16. Fibrillation manipulation
17. Shiatsu-Deep
18. Thai Massage
19. Shiatsu
20. Strength Alternate Massage
21. Twinkling Cupping
22. Cupping
23. Fibrillation Cupping
24. Cup retaining
support@belifu.co
3
Operating instructions
1. Connect the pads to the wire by snapping them
on, then remove the protective film.
Note: adding a few drops of water on the pads will increase
their longevity.
2. Place pads where the massage sensations are
desired. And plug into one of the ports on the
device. For additional relief, use the second port
and repeat steps 1&2 for two additional pads.
Make sure both pads on the skin and not overlap-
ping.
Make sure your skin is free from any dirt, oil or
lotion.
3. Turn the device on by pressing the on/ off switch
on the top of the unit. The unit will be now activated
and start in Model1.
4.Press the mode button to try different mode. Then
press the center button to choose the waves within
that selection. There are six icons on the screen,
press "<" and ">"button to change the six icons.
Each icon contains different built-in 4 modes, press
the "M" to choose the built-in 24 modes.
Please increase the intensity because it will return
to lowest automatically when you change to a new
mode.
5.Once you select a mode, gradually increase the
A/B intensity by pressing the + button on the right/
left side; decrease it by pressing ‐ button on the
right/ left side of the tens.
www.belifu.co
4
support@belifu.co