How To Operate - Rival FRRVSC500-B Manual De Instrucciones

HOw TO OPERATE

1. Make sure the unit is unplugged. Place Base on clean, dry surface.
2. Hook Front Housing onto Base. (Figure 1)
3. Place Ice Shaving Chamber in Front Housing
and ensure it is seated on the shaft. (Figure 2)
4. Twist the shaft in direction of arrow to lock into
position. (Figure 3)
5. Place the Mixing Paddle in Bowl.
6. If mixing shaved ice with other ingredients,
place ingredients in bowl.
NOTE: Use serving size markings as a guide
for appropriate ice and liquid levels. For a large
or small serving, fill the ice and liquid to the level
indicated on the bowl.
7. Slide Bowl into groove on Base and turn
clockwise until it stops. This will allow the
Mixing Paddle to mix ice and ingredients
once operation begins. (Figure 4)
NOTE: The Cup Guide on base may be used to
shave ice into another bowl or cup other then the
bowl supplied.
8. Turn selector knob to desired setting. Slushie
setting produces finer ice. Snow Cone setting
produces coarser ice.
9. Place ice in Ice shaving Chamber. Do not fill
above top rim of Ice Shaving Chamber.
10. Plug cord into outlet.
1
2
3
4
4
11. Place Lid on Front Housing and turn clockwise
to engage the interlock switch (Power Start/
Stop). The unit will start and begin to shave
ice. (Figure 5)
NOTE: It may be necessary to open Lid
occasionally to redistribute ice.
WARNING
Cut Hazard
• Avoid contact with Shaving Blade.
• D o not use if Shaving Blade is loose, cracked, bent or damaged.
12. Turn Lid counterclockwise to stop. Do not shave ice above top ice line.
13. To remove Bowl, turn counterclockwise, slide out and serve.
PREPARING ICY DRINkS OR SNOW CONES USING A SEPARATE
CONE OR CUP
NOTE: Make sure the unit is unplugged.
1. Select the desired ice setting. The Slushie setting produces fine ice
and Snow Cone setting produces coarse ice.
2. Add ice into the Ice Shaving Compartment.
3. Place cup or cone within the markings on the
Base. (Figure 6)
4. Plug cord into outlet
5. Place Lid on front housing and turn clockwise
to engage the interlock switch (power start/
stop) The unit will start and begin to shave ice.
NOTE: Open Lid and redistribute ice as needed.
6. Once the ice shaving has completed, turn lid
counter clockwise to stop. Slide out cone or cup and enjoy.
CAUTION: Do not allow children to operate this appliance. The Ice
Shaver is for household use only. Do not attempt to sharpen the Blade.
5
6
5