Lumex 7921RA Instrucciones De Montaje Y Operación página 3

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

9. Attach leg extensions by pushing in the adjustment
button, inserting leg extension into leg, and moving to
the desired height position — you will hear it click into
place (see figure 10; 7921RA shown).
10. Ensure that legs are locked at the same height, all leg
adjustment buttons protrude fully through adjustment
holes, and all screw knobs are tight.
11. Attach armrests by pressing the push buttons and
inserting armrest into armrest sockets until armrest
clicks into place (see figure 11; 7921RA shown).
12. Contact your GF distributor immediately if you
see any issue with fit, form, function, or safety. For
more information on GF Health Products, Inc. parts
and services, please contact your distributor or
www.grahamfield.com.
WARNING: Ensure that the Bath Seat is assem-
bled as described. If the Bath Seat is not prop-
erly assembled and installed, personal injury
and damage to the Bath Seat could result.
OPERATION
Adjusting Leg Height
Push in the adjustment button and and move to the de-
sired height position — you will hear it click into place.
Ensure that legs are locked at the same height and all leg
adjustment buttons protrude fully through adjustment
holes.
WARNING: Ensure all Bath Seat components
are secure before each use.
Center of Balance During Use
The point where the Bath Seat will tip forward, rearward or sideward is determined by its center of
balance and stability, and the center of balance and stability is affected by the user's body position
and weight distribution. If you fail to heed the following warnings, falling or tipping may occur and
could cause severe personal injury.
WARNING: To avoid falling or tipping:
Have someone help you until you know the balance points of your Bath Seat and
how to avoid tipping.
Do not put downward weight on one armrest at a time. If using the armrest for bal-
ance, hold both armrests at once to distribute your weight equally.
Do not put downward weight on the backrest.
Do not reach or lean if you must shift your weight to do so. Ask for help or use a
device to extend your reach.
Never try to reach an object if you must move forward in your seat and your but-
tocks do not stay in full contact with the seat.
Never lean backward to reach an object.
7921RA-INS-LAB-RevA10
fig. 10 (7921RA)
fig. 11 (7921RA)
3

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

7931ra

Tabla de contenido