Driver Installation; Hardware Installation - Conceptronic CLLCHATCAM Guía De Iniciación Rápida

ENGLISH

4.1. Driver Installation

a. Select the option 'Install Drivers' in the menu. The installation of the
driver will start. Click 'Next' to continue.
b. The driver will be installed. When using Windows 2000 or XP, a pop-up
message will appear that the product is not digitally signed or a message
about the logo test appears. Click 'Yes' or 'Continue Anyway' to
continue.
c. Click 'Finish' to complete the driver installation.

4.2. Hardware Installation

After the driver installation is completed, you can connect the
Lounge'n'LOOK Chatcam to any available USB port on your PC or on any USB
hub attached to your PC.
To use the microphone, connect the microphone cable to the MIC-In of your
soundcard.
a. Windows will prompt a 'Found New Hardware Wizard'. Select 'No, not
this time' and click 'Next'. (Windows XP SP2 Only!)
b. Select 'Install the software automatically (Recommended)' and click
'Next'.
c. A popup message about digital signature or logo test will appear. Click
'Yes' or 'Continue Anyway'.
d. Click 'Finish' to complete. Restart the computer.
4.3. Application installation – VP-EYE
The VP-EYE software is a powerful software package with various options.
With the VP-EYE software, you can create video-email, create postcards, play
games and make photos.
a. When the menu of the CD-ROM is still on your screen, click 'Install VP-
EYE Software' to open the VP-EYE installation menu. Otherwise click on
'Start' -> 'Run' and type 'x:\autorun.exe', (assuming X: is your CD-ROM
drive).
b. Select the option "Install VP-EYE 4.0" to install the VP-EYE software on
your computer. The installation will install by default all the available
applications. If you want customize the installation, click 'Change
8