Work Pro WEQ 231 Manual De Uso página 4

Idiomas disponibles

Front Panel Function:

a. Power Switch

This is the AC power switch, press it down, the blue LED bright, it means the

machine has switched on.

b. Increase/Reduce fader

Of the 31 bands, each attenuator controls each band increase/reduce bypass filter

signal level, the maximum increase/reduce of its central frequency is

when signal level has adjusted, the curve of the attenuator adjusted is the EQ

frequency response. Please take note that when adjusting, the level between

neighboring frequency points can be widely discrepancy, usually it doesn

exceed 3dB.

c. Feedback frequency indication LED

It provides 31 standard frequency display indication, when any frequency display

of the sound field produces feedback, its feedback LED can accurately show it to

you, and you can according to practical situation to attenuate frequency by far to

non-feedback.

d. Output signal VU meter

This meter is LED multi-step, respectively green LED show -20, -15, -10, 0, +10dB,

orange LED shows +15dB and red LED shows +20dB, the accurate level

indication makes you can monitor the output signal level at anytime and match

with back-step equipment.

e. Feedback display sensitivity

When several feedback frequency levels are closed to each other, and lead two or

several LED bright at the same time or the feedback level is low and the LED dark.

You can use this button to adjust threshold level of feedback indication, so that you

can see clearly of which frequency makes feedback and take relevant measures

to restrain.

f. Filter button and indicator

This knob controls connection (j) High-pass and (i) Low-pass of the filter,

press it down, connecting input circuit to the filter.

g. Bypass button and indicator

This knob controls the machine connection and bypass. It is convenient for the

soundman to compare signal between before and after equalizing. Press it down,

circuit bypass, signal directly from input channel through relay to output channel.

h. Output clip LED

This LED indicates that whether output signal is clipped or not. When it twinkles

once in a while, it indicates signal sometimes clip, but when it frequently twinkles,

it means signal badly clipped, and you should reduce input by far to the LED not

twinkling.

User Manual/Manual de Uso

15dB,

WEQ 231