Description Of Parts - Lenco IPS-260 Guia Del Usuario

Description of Parts

Main Unit
Front View
3
11
7
6
Rear View
12
15 14 13
1. iPad Support Frame
2. Docking Platform
3. iPad / iPhone / iPod docking connector
4. POWER / FUNCTION Button ---- Turn the unit on and off ; Select iPad / iPhone or AUX-IN
mode.
5. VOL + / - Button ----- Adjust volume level up or down
6. Status LED Indicator ----- In standby mode, the LED indicator will be off.
In iPad/iPhone mode, the LED indicator lights Green.
In AUX-IN mode, the LED indicator lights Red.
7. Remote Control Infrared Sensor
8. Rotating Head ----- Allow the iPad Support Frame to be rotated 90 degrees counterclockwise
for landscape operation / viewing on your Apple device.
9. View angle Hinge ---- To adjust the viewing angle of iPad / iPhone dock forward or back.
10. Support Arm
11. Speakers
12. Subwoofer
13. AUX-IN Jack ----- Auxiliary audio signal input
14. DC-in Jack -----For the connection of external DC power supply
15. Video Out Jack ----- Composite video output
IPS260 5 lang ib.indd 6-7
GB
Side View
8
9
10
1
12
2
11
5
4
4
GB
Description of Parts
Remote Control
1. Infrared Transmitter
2. STANDBY button ---- Turn the unit on and off.
3. button ----- In iPad / iPhone mode : Play / Pause iPod music.
4. button ----- In iPad / iPhone mode : Skip tracks
Forward; perform high-speed search.
5. MUTE button ---- Mute the volume.
6. FUNC Button ---- the function button, select iPad/iPhone
or AUX-IN mode.
7. button ----- In iPad / iPhone mode : Skip tracks
Backward ; perform high-speed search.
8. VIDEO ON/OFF button ----- Press to turn video output On or Off.
9. VOLUME + / - button --- Adjust volume level up or down.
10. Battery Compartment
Listening to iPad / iPhone / iPod
This model adopts different iPad / iPhone / iPod models.
1. Insert your iPad / iPhone / iPod into the docking port by placing the connector on the bottom
of the iPad / iPhone / iPod onto the connector at the docking platform.
Caution :
Please be careful when seating the iPad / iPhone / iPod into the docking to avoid damaging the
30-pin connector on the iPad / iPhone / iPod or in the docking system.
2. Press the POWER / FUNCTION button to turn on the unit.
3. Press the POWER / FUNCTION button until the iPad / iPhone mode is selected, the Status
Green LED Indicator lights on steadily.
From your iPad / iPhone / iPod :
To start playback music, press the PLAY button.
To pause the music, press the PAUSE button.
When a song playback, press and hold the
forward / backward.
To skip to next or previous song, press the
From the main unit :
You may press the VOL + / - button to adjust the volume to a desired level.
Note : The volume level cannot be adjusted by the volume control of your iPad / iPhone / iPod
after being docked.
4. To turn off the unit, press and hold the POWER
indicator lights off.
When the unit is powered by the external DC adaptor and once the iPad / iPhone / iPod
connected to the docking port, the unit recharges the iPad / iPhone / iPod battery.
VIDEO OUT ON/OFF SELECTION FROM MAIN UNIT AND REMOTEL CONTRO
To select main unit video out OFF (watch movie on Apple device screen) :
When the unit is at standby mode, just press the POWER
unit or the STANDBY button from the remote control which will turn on the unit and it will be in
video out OFF status.
1
2
3
7 4
5
8
6
9
10
/ button to perform high speed search
/ button.
/ FUNCTION button and the Status LED
/ FUNCTION button from the main
5
2011-4-28 10:36:54